ELectric_Vehicles

Home

Newsletter

Lithiumate Pro BMS, 12 prism. cells

Lithiumate Pro BMS, 12 prism. cells

Elithion Lithiumate Pro System is a digital BMS, specifically designed for electric car conversions. This BMS monitors, evaluates, balances and protects a Li-ion battery pack.

More details


1 180,00 € tax incl.

KP-PR106-12

Availability:

1 item in stock


 

BMS FOR 12 PRISMATIC CELLS

KL-PR106-12 KIT CONTENTS:

QtyP/NDescription
11 1PR0106M Cell board, prismatic, 106 mm spacing, M8, mid-bank
2 1PR0106N Cell board, prismatic, 106 mm spacing, M8, neg. end, r.a conn.
2 1PR0106P Cell board, prismatic, 106 mm spacing, M8, pos. end, r.a conn.
1 2CN0000E Lithiumate Pro controller, enclosed
1 2CS0100K Current sensor, cable mounted, 100 A
4 EKP6402US Connector, C-grid, female housing 2-pin
2 EKP6404US Connector, C-grid, female housing 4-pin
3 EKP6405US Connector, C-grid, female housing 5-pin
38 EKP6403SG Connector, C-grid, socket
1 EKP9416US Connector, Mini Fit Jr, female housing, 16-ckt
20 EKP9405ST Connector, Mini Fit Jr, socket
5 EWC2404CF Cable, 24 AWG, 4 cond + shield
1 2SK0000K Lithiumate Pro starter kit

 

Elithion logo

   

Lithiumate Pro Overview

 

Professional distributed Li-Ion BMS

  

 

Lithiumate pro masterClick picture to enlarge

 

Lithiumate Pro master

 

This BMS monitors, evaluates, balances and protects a Li-Ion battery pack.

  • Off the shelf, plug-and-play
  • For professional applications: commercial grade, metal case (not sealed)
  • Distributed (a cell board is mounted on each cell: measures voltage and temperature, balances the cell)
  • Minimum number of wires in HV pack, single wire to adjacent cell boards
  • For large packs: up to 255 cells (~ 900 V), in up to 16 banks, and up to 16 strings in parallel
  • Supports all cell form factors: prismatic, small & large cylindrical, pouch
  • Supports mid-voltage Lithium-ion chemistries:
    • Lithium iron phosphate (LFP): LiFePO4 , LiFeYPO4
    • LiCoO2 (LCO) - Lithium cobalt oxide
    • LiMn2O4 (LMO) - Lithium manganese oxide
    • LiNiMnCoO2 (NMC) - Lithium nickel manganese cobalt oxide
    • LiNiCoAlO2 (NCA) - Lithium nickel cobalt aluminum oxide
  • Protects cells from over current, under/over voltage, under/over temperature
  • Dissipative (passive) balancing (top balance)
  • Sophisticated, digital technology: reports each cell's voltage and temperature
  • CAN and RS232 communications
  • Fully configurable, field programmable
  • Cable mount Hall Effect current sensor
  • Contactor drivers with precharge
  • Optical isolation between pack and low voltage circuit
  • Pack isolation loss detection (optional)
  • Graphics User Interface

General description of the professional distributed Li-Ion BMS

 

Ideally matched to work in high power Li-Ion battery packs

  • Up to 255 cells in series (~840 V), no limit to cells in parallel, isolated
  • No limit to cells in parallel, up to 600 A (higher currents available)
  • Includes contactor drivers, a cooling fan interface and an interlock input

Distributed: electronic assemblies are mounted on cells

  • Mechanically matched with cylindrical, pouch or prismatic cells
  • Minimal wiring (no "spaghetti"); individual cell voltage and temperature
  • Controller communicates with Cell Boards on cells, and with external system

Ideally matched to Li-Ion cells

  • Lithium-ion Polymer(LiPo)
  • Standard lithium-cobalt-oxide (LiCoO2)
  • Lithium-Manganese-Nickel-Cobalt (LiMnNiCo)
  • Nano-phosphate / lithium-iron-phosphate / lithium-ferro-phosphate (LiFePO4)
  • Lithium-manganese-oxide (LiMnO2)
  • Not compatible with lithium-titanate cells (Altair Nano)
  • Not compatible with lithium-sulfur cells (SIon Power)

Ideally matched to plug-in vehicles

  • Compatible with most chargers, motor drivers
  • CAN bus, ignition line input, 12V power

Performs monitoring, evaluation, communication, balancing and protection

  • Monitors the voltage and temperature of each set of parallel cells, and the pack current
  • Evaluates SOC (State Of Charge), DOD (Depth Of Discharge), and SOH (State Of Health)
  • Calculates the pack's internal resistance
  • Determines appropriate CCL (Charge Current Limit) and DCL (Discharge Current Limit)
  • Detects any abnormal conditions and sets a fault accordingly
  • Communicates through a serial port and through a CAN bus, reporting above data
  • Balances the charge through dissipation of excessive energy in most charged cells
  • Protects against over and under-voltage, over and under-temperature, over-current
  • Optional HV Front End tests for loss of isolation and end of precharge current (using a precharge resistor, not supplied)

 

Applications

  • Automotive: EV, HEV, PHEV
  • "Mules" and proof-of-concept products
  • Specialty vehicles
  • Marine
  • Aviation: EV
  • V2G and V2H
  • Distributed energy
  • Peak shaving
  • Power back-up: UPS

 

Lithiumate Pro Specifications

General specifications of the professional distributed Li-Ion BMS

Controllers

These are simplified specifications that may apply to a typical system.
Actual specifications depend on which components are used in a system.
Detailed specifications are in the manual

Item Value Units
Supply voltage 12 Vdc nom
12 V supply current 150 mAdc nom
Control inputs' voltage 0 to 12 Vdc nom
Digital outputs' sink current 1.5 Adc cont max
5 Adc peak max
Analog outputs' voltage 0 to 5 Vdc
RS232 rate 19200 baud
CAN rate 125, 250, 500 or 1000 kHz
Reading rate 0.1 to 1.5 readings / s
Number of cells monitored 1 to 255 -
Operating temperature -40 to +85 °C
Volume 0.8 liters
Sensed battery current 5 to 600 Adc
Cell voltage sensing range 2.09 to 4.54 Vdc
Cell voltage sensing accuracy +/-20 mVdc
Cell-board temperature sensing accuracy +/-4 °C
Cell current drain, standby 2.0 µA max
Cell current drain, operating 2 mA nom
Cell current drain, balancing 200 mA nom
Battery isolation 2.5 kV

Cell boards

Electrical specifications

Detailed electrical specifications are in the Lithiumate™ Manual.

Symbol Item Conditions Min Nom Max Units
Vrange Cell voltage sensing range - 2.09 - 4.54 V
Vaccur Cell voltage sensing accuracy Within Vrange - ±10 ±15 mV
Isply Cell load current Stand-by - - 2.0 µA
Active,
1-reading / sec
- 1.5 2.0 mA
Balancing - 200 - mA
VISOL Isolation voltage End cell boards
Between battery & low voltage
- 2500 - V

Mechanical specifications

Mechanical specifications are in the Lithiumate™ Manual.

Regulatory

Radiated emissions, FCC part 15 class A

 

 

 

Contact us if you have a different battery cell type or layout. We'd be happy to send you a quote.

 

Cart  

(empty)

New products

No new product at this time

Specials

No specials at this time